Servedat Status

The ExpeDat and SyncDat server software will return additional information about its status and configuration.  The following example queries the default port 8080:

prompt# mtping DataExpedition.com ACT_IDSTR dataexpedition.com (70.164.67.132:8080) Response 0 of 207 bytes after 0 repeats in 0ms (Version 2/0): servedat - 1.12.4 Oct 2011 - DEI, DOC-1.12.1 MTP-osx-3.15.1 183 00000001: ExpeDat-1.12E Data Expedition Inc. - DataExpedition.com, Internal Server Statistics (11204): Name: servedat Version: 1.12.4 Platform: osx Clock: Thu Nov 3 11:07:44 2011 Clock Skew: 0 seconds Delimiter: / Load: 0,1,1 Capacity: 10 Up Time: 20.0 hours Config Time: 20.0 hours Idle Time: 17.1 hours

The fields displayed may vary depending on the server version and configuration.  See the ExpeDat documentation for more information about servedat configuration.

You can also use mtping to monitor servedat's load over time.  The following example queries the server's load at 10 second intervals up to 999 times:

host-15: mtping -i 10 -c 999 DataExpedition.com ACT_PING DataExpedition.com (70.164.67.132:8080) 0 bytes from 70.164.67.132: count=0 repeats=0 time=17 ms 0 bytes from 70.164.67.132: count=1 repeats=0 time=40 ms rspn=1 0 bytes from 70.164.67.132: count=2 repeats=0 time=45 ms rspn=1 0 bytes from 70.164.67.132: count=3 repeats=0 time=60 ms rspn=2 0 bytes from 70.164.67.132: count=4 repeats=0 time=57 ms rspn=2 0 bytes from 70.164.67.132: count=5 repeats=0 time=63 ms rspn=2 0 bytes from 70.164.67.132: count=6 repeats=0 time=41 ms rspn=1 ...

Only non-zero response values are displayed and the maximum value is 255.